Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2008
    Posts
    5

    Let's go back a few years

    Anybody remember the Zone Perfect Control Center of 1994? Attached is a picture of the circuit board. What do the relays that are circle control? I haven't had my system on for awhile and the led above the far left is lit, indicating an energized relay. What is it telling me? Any help greatly appreciated.
    Attached Images Attached Images  

  2. #2
    Join Date
    Feb 2004
    Posts
    2,597
    It's telling you it's time for service.

  3. #3
    Join Date
    Jun 2008
    Posts
    5
    Thank you billva, but I don't think that is it. the heartbeat led is flashing green 1 per second. I know the 3, 4, and 5 led are for the zones and led 6 is for the fan. 1 and 2 led I do not know what they indicate. the four leds in the upper middle of the diagram are for the diagnostics, the 6 leds above the relay indicate the relay is energized.

  4. #4
    Join Date
    May 2002
    Location
    Houston Texas
    Posts
    6,323
    No DIY read the rules; if you are a pro et your post count up to 15 and apply for pro status. Isn't zone perfect an April Air product try calling their technical support.

  5. #5
    Join Date
    Jun 2008
    Posts
    5

    Geeeeez

    I wasn't trying to DIY anything. Just wondering what an led is indicating.
    The Zone Perfect is a Bryant product, by the way.

  6. #6
    Join Date
    May 2002
    Location
    Houston Texas
    Posts
    6,323
    Not saying you are a DIYer but rules don't allow discussing technical items in an open forum.

    If you are a tech call Bryant tech asssitance they can help you out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event