Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2008
    Posts
    5

    Let's go back a few years

    Anybody remember the Zone Perfect Control Center of 1994? Attached is a picture of the circuit board. What do the relays that are circle control? I haven't had my system on for awhile and the led above the far left is lit, indicating an energized relay. What is it telling me? Any help greatly appreciated.

  2. #2
    Join Date
    Feb 2004
    Posts
    2,597
    It's telling you it's time for service.

  3. #3
    Join Date
    Jun 2008
    Posts
    5
    Thank you billva, but I don't think that is it. the heartbeat led is flashing green 1 per second. I know the 3, 4, and 5 led are for the zones and led 6 is for the fan. 1 and 2 led I do not know what they indicate. the four leds in the upper middle of the diagram are for the diagnostics, the 6 leds above the relay indicate the relay is energized.

  4. #4
    Join Date
    May 2002
    Location
    Houston Texas
    Posts
    6,370
    No DIY read the rules; if you are a pro et your post count up to 15 and apply for pro status. Isn't zone perfect an April Air product try calling their technical support.

  5. #5
    Join Date
    Jun 2008
    Posts
    5

    Geeeeez

    I wasn't trying to DIY anything. Just wondering what an led is indicating.
    The Zone Perfect is a Bryant product, by the way.

  6. #6
    Join Date
    May 2002
    Location
    Houston Texas
    Posts
    6,370
    Not saying you are a DIYer but rules don't allow discussing technical items in an open forum.

    If you are a tech call Bryant tech asssitance they can help you out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365