Results 1 to 6 of 6
Thread: Let's go back a few years
-
06-19-2008, 07:06 PM #1
Regular Guest
- Join Date
- Jun 2008
- Posts
- 5
Let's go back a few years
Anybody remember the Zone Perfect Control Center of 1994? Attached is a picture of the circuit board. What do the relays that are circle control? I haven't had my system on for awhile and the led above the far left is lit, indicating an energized relay. What is it telling me? Any help greatly appreciated.
-
06-19-2008, 07:44 PM #2
Professional Member
- Join Date
- Feb 2004
- Posts
- 2,597
It's telling you it's time for service.
-
06-19-2008, 08:41 PM #3
Regular Guest
- Join Date
- Jun 2008
- Posts
- 5
Thank you billva, but I don't think that is it. the heartbeat led is flashing green 1 per second. I know the 3, 4, and 5 led are for the zones and led 6 is for the fan. 1 and 2 led I do not know what they indicate. the four leds in the upper middle of the diagram are for the diagnostics, the 6 leds above the relay indicate the relay is energized.
-
06-19-2008, 10:20 PM #4
Professional Member*
- Join Date
- May 2002
- Location
- Houston Texas
- Posts
- 6,270
No DIY read the rules; if you are a pro et your post count up to 15 and apply for pro status. Isn't zone perfect an April Air product try calling their technical support.
-
06-19-2008, 10:25 PM #5
Regular Guest
- Join Date
- Jun 2008
- Posts
- 5
Geeeeez
I wasn't trying to DIY anything. Just wondering what an led is indicating.
The Zone Perfect is a Bryant product, by the way.
-
06-20-2008, 12:43 AM #6
Professional Member*
- Join Date
- May 2002
- Location
- Houston Texas
- Posts
- 6,270
Not saying you are a DIYer but rules don't allow discussing technical items in an open forum.
If you are a tech call Bryant tech asssitance they can help you out.
Reply With Quote
