Help! Potential Venting Issue Rheem 90

[canadianim]

Contractors onsite now. Rheem Prestige 90 unit is being installed within 5 feet of outside wall but outside 2nd story deck is about 7feet high. Contractors concerned about proper outside vending. May have to cut hole in deck & put in an elbow and vent it through the deck. I'm ok with this, but I am concerned if there are issues with 'how many elbows' or 'angle of elbows' or length of outside vent. Any advice would be GREATLY appreciated.
LIVE 11:17am EST Toronto Canada

[House]

Can you post a couple of pics?

[beenthere]

How close will the vent be to the deck.
The deck can be treated the same as a sofit for clearence.

[canadianim]

sorry took so long, had to convert photo into a Word document to get the file size down from 2meg to less than 100K !

This is a picture of the wall where they need to vent the furnace. The furnace is sitting about 3-5 feet behind the brick wall where you see the A/C unit.

Thanks!

[beenthere]

I can't view it.

[canadianim]

I will try to convert it again to another format. Damn camera takes too high quality photos!

[canadianim]

hopefully you can see this picture and help us. thx !

[BuzzLitYr]

See if this works... it was VERY small....

[House]

That tall vertical white pipe is a downspout, correct?

[canadianim]

to HOUSE: Yes, that is the downspout you see.

[canadianim]

Thanks Buzz!

[Mr Bill]

[canadianim]

BEENTHERE - Mr.Bill has posted a nice large picture for you. THANKS MrBill!