Results 1 to 4 of 4
  1. 06-15-2008, 08:57 AM #1
    DaveV
    DaveV is offline New Guest
    Join Date
    Jun 2008
    Posts
    2

    Carrier Infinity troubles

    Hello all,

    I have a Bryant furnace, ac and infinity thermostat.
    Since day one the ac was unable to provide me with sufficient cooling on hot days. I tried to increase the cfm by using the dip switches on the furnace board, and now the thermostat is locked out saying service required, and the furnace board is flashing code 25, which seems to indicate equipment missmatch. I returned the dip switch back to original but the fault will not clear. The condensor would run without the blower coming on. I installed a honeywell t-stat that I had and rewired to work as a normal furnace would. All is well but I really want the Infinity to work. Has anyone encountered this problem?
    Reply With Quote Reply With Quote
  2. 06-15-2008, 09:14 AM #2
    Jay 41's Avatar
    Jay 41
    Jay 41 is offline Professional Member
    Join Date
    Mar 2008
    Location
    Grundy Co. IL
    Posts
    772
    Quote Originally Posted by DaveV View Post
    Hello all,

    I have a Bryant furnace, ac and infinity thermostat.
    Since day one the ac was unable to provide me with sufficient cooling on hot days. I tried to increase the cfm by using the dip switches on the furnace board, and now the thermostat is locked out saying service required, and the furnace board is flashing code 25, which seems to indicate equipment missmatch. I returned the dip switch back to original but the fault will not clear. The condensor would run without the blower coming on. I installed a honeywell t-stat that I had and rewired to work as a normal furnace would. All is well but I really want the Infinity to work. Has anyone encountered this problem?
    Call your service company before you waste more time and money.
    Reply With Quote Reply With Quote
  3. 06-15-2008, 10:50 AM #3
    DaveV
    DaveV is offline New Guest
    Join Date
    Jun 2008
    Posts
    2
    I just want instruction on how to clear the fault on the T-stat. The stat should override the dip switch settings on the furnace (found that out too late). I can go through the start up procedure again if that helps.
    Reply With Quote Reply With Quote
  4. 06-15-2008, 12:05 PM #4
    nikolce
    nikolce is offline Regular Guest
    Join Date
    Oct 2006
    Posts
    28
    Quote Originally Posted by DaveV View Post
    I just want instruction on how to clear the fault on the T-stat. The stat should override the dip switch settings on the furnace (found that out too late). I can go through the start up procedure again if that helps.
    infinity looks at out door unit and determs the cfm by it u can not adj CFM on infinity to reset it you have to go to addvance
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules