Results 40 to 52 of 303
Thread: Help! I am in serious trouble!
-
06-13-2008, 08:25 PM #40
Professional Member*
- Join Date
- Dec 2002
- Location
- Houston,Tx.
- Posts
- 14,901
“I am glad that I paid so little attention to good advice; had I abided by it I might have been saved from some of my most valuable mistakes.” - Edna St. Vincent Millay
The critic is a prisoner to his own experiences and perspectives, erroneously believing his limited experiences are the sum of all truth.
No Guns…No Freedom…Know Guns…Know Freedom.
-
06-13-2008, 08:27 PM #41
Regular Guest
- Join Date
- Jun 2008
- Location
- TN
- Posts
- 133
Pretty much....can you tell? :-) But I still paid a lot
Originally Posted by I_bend_metal
Okay, am I in deep doo-doo here?
-
06-13-2008, 08:28 PM #42
Regular Guest
- Join Date
- Jun 2008
- Location
- TN
- Posts
- 133
How long does that require? Originally Posted by Mr Bill
Look it's easy to find out if it's air flow related or freon pumping through the lines. Heres what you do go outside and "hopefully" you have a disconnect on your outside condenser well flip that sucker off, if no disconnect well kill the breaker to the outside unit and then go back in and turn on the unit inside to the fan on position on the thermostat and see if you still hear the noise.
-
06-13-2008, 08:29 PM #43
Professional Member
- Join Date
- Dec 2007
- Location
- Ohio
- Posts
- 2,875
Wart....edit your post and delete the pricing...it's not allowed on here....FYI.
Well, we in the business say...."you have been hacked"I need a new signature.....
-
06-13-2008, 08:29 PM #44
Professional Member*
- Join Date
- Dec 2002
- Location
- Houston,Tx.
- Posts
- 14,901
Were is this going?
“I am glad that I paid so little attention to good advice; had I abided by it I might have been saved from some of my most valuable mistakes.” - Edna St. Vincent Millay
The critic is a prisoner to his own experiences and perspectives, erroneously believing his limited experiences are the sum of all truth.
No Guns…No Freedom…Know Guns…Know Freedom.
-
06-13-2008, 08:30 PM #45
AOP Committee/Professional Member*
- Join Date
- Jun 2005
- Location
- SW Wisconsin
- Posts
- 3,683
During the cold weather a heat pump does its best at 450-CFM per/ton airflow.
That is 1575-CFM in the heat pump mode.
It also needs to be tolerable at that airflow level.
Everything to do with the airflow & noise, needs to be thoroughly checked.
There are a lot of ways to reduce & deaden ductwork & refrigerant line noise transmission. The noise issue can be resolved!
- DarrellAOP Forum Rules:
Rules for Posting
Rules For Equipment Owners
Equipment Owners Find a Contractor HERE!
udarrell
-
06-13-2008, 08:31 PM #46
Professional Member
- Join Date
- Jan 2007
- Location
- N.E. Ok.
- Posts
- 1,296
For starters your pump needs to be elevated.
get your pen out for the rest.
-
06-13-2008, 08:31 PM #47
Regular Guest
- Join Date
- Jun 2008
- Location
- TN
- Posts
- 133
It probably won't surprise you to hear....I have no idea! Originally Posted by Mr Bill
Were is this going?
-
06-13-2008, 08:32 PM #48
Professional Member
- Join Date
- Jan 2007
- Location
- N.E. Ok.
- Posts
- 1,296
Looks like the drain Originally Posted by Mr Bill
Were is this going?
-
06-13-2008, 08:32 PM #49
Regular Guest
- Join Date
- Jun 2008
- Location
- TN
- Posts
- 133
I'm sorry....I don't follow. Do you mean it will be expensive to fix? It was only put in 2 days ago! Eeeek! Originally Posted by captube
-
06-13-2008, 08:34 PM #50
Professional Member
- Join Date
- Jan 2007
- Location
- N.E. Ok.
- Posts
- 1,296
Plus 1
The dryer vent is angled away from the unit.
-
06-13-2008, 08:34 PM #51
Regular Guest
- Join Date
- Jun 2008
- Location
- TN
- Posts
- 133
Hacked as it cheated, or hacked as in it's a bad job? Originally Posted by I_bend_metal
Oh no, what should I do?!!!!
-
06-13-2008, 08:35 PM #52
Professional Member
- Join Date
- Jan 2007
- Location
- N.E. Ok.
- Posts
- 1,296
Don't worry about that to much move it away from the unit Originally Posted by WorryWart
Or better yet have the contractor move it. The drain line.
The unit needs to be put on legs to elevate it from the ground.Last edited by captube; 06-13-2008 at 08:39 PM. Reason: Clarification
Reply With Quote
