20 to 30 min ON; 7 to 10 min OFF
My AC......90 degrees outside, 76 degrees inside, NY State
cycles as shown in subject.
is this correct? Or does something look wrong? I gave a range of on and off because it is not always exactly the same, but it is in the range given
Put the stopwatch away IMO.
If more government is the answer, then it's a really stupid question.
Oh gee...don't ya love when they have 4 pages of legal pad paper with times...temps....on...off....
Not you op...your just bringing back memories
If your cool...leave it at that and be happy...
Hey, I running one on mine now. Its been running non stop for over 4 hours.
Originally Posted by mark beiser
Feels great in here. Its working fine. OD temp 92.5, ID temp 72.2. (dang kids been running in and out)
OP, long run times are normal when the OD temp is above 90°, your cycles are fine.
Like others have said... Long runtimes (near constant) here to maintain 72* with 95* OD temp. Once you get near/reach your design temp this isn't irregular. You also don't have your thermostat set that low.
I don't have 4 hour run times, I have 20 to 30 min run times. Are you saying that 30 minutes is a long run time and that I am fine?
Originally Posted by beenthere
30 minutes is a good run time, for your OD temp and ID setting.
Twilli says replace watch
No Heat No Cool You need Action Fast
Your time is going to change constanly for you are working with pressures and tempertures. You also have to rememeber your humidity playes apart too
Long is measured in Hours not minutes
5 hours is a long run time but necessary
Originally Posted by brewyourown
if it's sunny and > 95'F out
and thermostat is set to 75'F.
It's Not Rocket Science, But It is SCIENCE
with "Some Art". ___ ___ K EEP I T S IMPLE & S INCERE
Define the Building Envelope and Perform a Detailed Load Calc: It's ALL About Windows and Make-up Air Requirements. Know Your Equipment Capabilities