Any good tips on which evap. coil cleaner works best on a pull and clean?
I fully support the military and the War on Terrorism.
If you don't know, then don't do. If you don't know and still do, then be prepared to pay someone else a lot to undo what you did and then do it right.
If you do know, then do. But do it right. Otherwise, you may not be doing it long.
I am the tech that does the coil cleans (been doing it for 20 + yrs) Looking for a cleaner that works better than the crap i'm using. Just thought someone might know of something that actually works.The good cleaners that we used to use aren't sold anymore.Probably cost to much to make.
Apply for pro membership and then post over there. We can't disclose that information in the open forum.
If your pulling the coil. and cutting it free. Best to use a good strong coil cleaner that you use in a coil gun. And with the water hose, you should be able to get a lot of the crap out. Also, HOT water works much better than cold.
I fully support the military and the War on Terrorism.
If you don't know, then don't do. If you don't know and still do, then be prepared to pay someone else a lot to undo what you did and then do it right.
If you do know, then do. But do it right. Otherwise, you may not be doing it long.
Thanks, i'll ck out pro membership tommorrow.
I would think you could use use cond cleaner if your pulling it and bringing it outside.