I am needing to interface BACnet over IP or Ethernet with JCI. The customer does not want to use an NAE, they are firm about using NCM's. SO.....
Does anyone know if a JCI NCM w/BACnet exists?
If it exists, is it over IP and/or Ethernet?
Does it auto discover?
Limitations on point count?
What other "Gotcha's" do you know about.
Here is a link to S4. http://www.thes4group.com
Originally Posted by C1CServPatron
Steve will help you out.
I have a question:
Why does this customer not want the best automation solution in the whole wide world and possibly the galaxy in his buildings?
I had a customer with a similar sounding project/needs, but the branch wouldn't cooperate. I put in FX40s, maybe you'll get some cooperation.
Metasys BACcrap System Integrator - Product
Metasys BACcrap System Integrator - Installation
Metasys BACcrap System Integrator - Commissioning
What a wealth of information. Thank you for the links and the fast response!!
Have a great weekend.....
Botech has a good BACnet driver
Originally Posted by freddy-b