Page 1 of 5 12345 LastLast
Results 1 to 13 of 58
  1. #1

    Trane CVHE Teardown Manual

    Hi,
    Could someone please help, looking for a manaul
    to carry out an inspection on a CVHE-025B

    Thanks.

  2. #2
    Join Date
    Apr 2004
    Posts
    423
    Stop asking for manuals that others have to pay for. You can go to school like the rest of us or go work for an OEM. By the looks of your name you are a building maintenance puke trying to do chiller work. whatever the case that material isn't free so don't expect us to just give it to you.

  3. #3
    Join Date
    Aug 2000
    Location
    USA
    Posts
    4,979
    First post and asking for a teardown manual, aint gonna happen.
    Your poor planning does not constitute an emergency on my part!!!!

  4. #4
    Join Date
    Aug 2006
    Location
    Mixing oil and fire with a big spoon.
    Posts
    4,010
    like abs said. nope. i am sure that you are a great person...but we don't know anything about you.

    welcome to the forum, though!

    good luck.
    It's tube brushing season...93% done (39.35 miles of tubing)...only 1,242 tubes to go!

    Original member of the Raccoon Brotherhood.

    EVERYTHING IS AWESOME!!!

  5. #5
    Join Date
    Jul 2006
    Posts
    68

    Angry

    yeah!!!

  6. #6
    Join Date
    Feb 2008
    Location
    Ringgold GA
    Posts
    152
    Inspection? Is the paint still shiny? If it is, you're done, if not look for leaks, page one of the manual. Good luck!
    We aren't service engineers, we are service re-engineers!! Work is what you make it, have fun.....

  7. #7
    Join Date
    Aug 2006
    Location
    Mixing oil and fire with a big spoon.
    Posts
    4,010
    nh3engineer...as in ammonia engineer?

    good luck.
    It's tube brushing season...93% done (39.35 miles of tubing)...only 1,242 tubes to go!

    Original member of the Raccoon Brotherhood.

    EVERYTHING IS AWESOME!!!

  8. #8
    Join Date
    Apr 2001
    Posts
    669
    Quote Originally Posted by nh3engineer View Post
    Hi,
    Could someone please help, looking for a manaul
    to carry out an inspection on a CVHE-025B

    Thanks.

    Here you go:
    http://www.trane.com/Commercial/Uplo...u01een_405.pdf

    http://www.trane.com/Commercial/Uplo...n01cen_105.pdf

    http://www.trane.com/Commercial/Uplo...n03den_305.pdf


    Jabs

  9. #9
    Join Date
    Aug 2006
    Location
    Mixing oil and fire with a big spoon.
    Posts
    4,010


    bad, bad jayguy!!! i read into it as a tear down manual as well. what type of inspection are you performing? tear down? (still not going to get anything.) running inspection? shut down inspection?

    too many different types of "inspections" to list anything useful except the IOM as Jabs has done. be a little more specific about what you want...otherwise we will assume for you! (as you can see)

    good luck.
    It's tube brushing season...93% done (39.35 miles of tubing)...only 1,242 tubes to go!

    Original member of the Raccoon Brotherhood.

    EVERYTHING IS AWESOME!!!

  10. #10
    Join Date
    Aug 2000
    Location
    USA
    Posts
    4,979
    I don't think you read into it to far. The thread is titled ''Trane CVHE Teardown Manual''. I think that is pretty clear.
    Quote Originally Posted by jayguy View Post
    bad, bad jayguy!!! i read into it as a tear down manual as well. what type of inspection are you performing? tear down? (still not going to get anything.) running inspection? shut down inspection?

    too many different types of "inspections" to list anything useful except the IOM as Jabs has done. be a little more specific about what you want...otherwise we will assume for you! (as you can see)

    good luck.
    Your poor planning does not constitute an emergency on my part!!!!

  11. #11
    Join Date
    Jul 2001
    Location
    maryland
    Posts
    1,353
    You guys are pretty harsh, we give each other manuals in the controls section all the time.

  12. #12
    Join Date
    Feb 2008
    Location
    Ringgold GA
    Posts
    152
    Controls cause more headaches than chillers, that's why you guys need so many gosh darn manuals and supercedes. Can't keep up with it!
    We aren't service engineers, we are service re-engineers!! Work is what you make it, have fun.....

  13. #13
    Join Date
    Feb 2004
    Location
    Georgia
    Posts
    349
    Quote Originally Posted by nh3engineer View Post
    Hi,
    Could someone please help, looking for a manaul
    to carry out an inspection on a CVHE-025B

    Thanks.
    I don't know, you have to wonder if ya can't spell manual right then what the hell ya doin needing a teardown manual. Could be the ammonia though, I have had a hit or two of that stuff and it makes 123 feel like nitrogen...


    Mike

Page 1 of 5 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event