Amana Furnace Issue
Hello I have an Amana Furnace and having an issue with it. Here is what happens:
I turn the thermostat to heat. I take off the top outside cover of the furnace. I can see 3 burners that are fed by natural gas. There is a glow stick that lights up and the gas hits that glow stick. I see blue flame in all 3 of the burners and the blower comes on. All the flames go out and the blower motor cuts off. Then the cycle starts over again. It will continue this cycle for 3 - 5 tries then the burners will not come back on but the blower motor continues to run. Has anyone run into this issue before or know what the issue could be? I am trying to resolve this myself if possible. Thanks MAC
This is not a DIY site. Please read the rules. Call a pro to fix your gas furnace.
Its a good Life!
No pricing, no DIY, please read Site Rules
Sorry, but we're not allowed to give DIY instructions.
It may be something easy, or it could be something serious, we can't tell from here.
There are test instruments that you don't have that may be needed.
Whens the last time it was serviced or tuned.
now is a good time to hav it serviced. Call your local service company.
Originally Posted by beenthere
Last edited by Senior Tech; 03-26-2008 at 12:15 AM.
Just many home owners want to DIY, and keep HVAC people from making a living.
And this site for HVAC Trades people doesn't promote that.
Your free to find DIY sites.
do it right the first time!
He's probably fallen through the ceiling by now.
I was going to suggest he take his family to a neighbors house while he is playing with a gas fired appliance.