Looking for Lennox info

[ampulman]

Just went to the Lennox site and read about the new G71P furnace. Very interesting.

Unfortunately, the information in the .pdf is rather sparse.

Could any of you Lennox guys provide a link for detailed information, e.g., air flows vs. temperature input, temperature rise, etc., etc.?

Thanks.

AM

[pacnw]

as of this time, I would say DON'T get one!!!!
too many things too new that need to be worked out.

[tinknocker service tech]

read the tread on madulating furnaces and you will get a detailed view
good unit

[ampulman]

as of this time, I would say DON'T get one!!!!
too many things too new that need to be worked out.

I would tend to agree with that. Likewise, the new Carrier ICS.

Tinknocker wrote (in another thread):
read the tread on madulating furnaces and you will get a detailed view
good unit

I did read it. Interestingly, the Lennox site states 1% changes in firing rates, but the descriptions of the 3 modes talks about 10% increases.

Based on my reading, here and elsewhere on the Net, the Rheem Mod will give me the fast recovery and level of comfort that I'm looking for.

Still looking for Mr. Right (contractor, that is).

AM

[charliebear]

I noticed on their site that the G61MPV is no longer listed. (I think it used to be a Signature model)

Perhaps they tweaked the G61MPV and changed the name to G71P ? In any event, they don't have a Signature model of the 61 series anymore.

[t527ed]

G61 kicked back to Elite Series.