ReplyThe only option is thru JCI or ABCS dealer that still works with NAE's.
In other words. You are going to be screwed.
Regular Guest
Nae55 Problem
Hi, I have a Johnson Controls NAE5510-0E network engine.I need a bios update utility software and image file.How can i find this softwares?Thanks.
Banned
The only option is thru JCI or ABCS dealer that still works with NAE's.
In other words. You are going to be screwed.
Professional Member
If you need version 2.1 or 2.0 then I can help
Professional Member
Originally Posted by exwtk
This software requires a license. Freddy it correct on this one...
Regular Guest
Thanks, could you please send me to my mail adress this software ver.2.1? carismatic_boy@hotmail.com
Regular Guest
I'd bet that the JCI police are on the case now.
Professional Member
Does anyone have a copy of Microsoft Office they would like to share? It's really expensive and I don't feel like paying....it's just software.
Maybe HVAC-TALK can set up a FTP site, that would make it much easier.
http://www.siia.net/piracy/report_software.asp
Banned
If memory serves correctly at 2.1, even if you have the image files. If you dont have the program to transfer them it wont do you anygood. To add if you do have the transfer program it will not install without SCT on the same PC. Also you must be at NAE for I do not think it will work over the network. I may be wrong, but I think its locked down good.
Mac, I agree with you 100% on piracy, However, If this guy is the original purchaser of said NAE. Anything needed for its current revision for fundemental operation should be included in the deal. Or at minimum, provide the service to reimage at a discount (Time).
Professional Member
Banned
Ya, you better frame that one!
Professional Member
hum... where did you find the link?Does anyone have a copy of Microsoft Office they would like to share? It's really expensive and I don't feel like paying....it's just software.
Maybe HVAC-TALK can set up a FTP site, that would make it much easier.
http://www.siia.net/piracy/report_software.asp
"Yeah I can figure out whats wrong with it, but you were here first and there isn't room for two, plus it's cold up here, I'll be in the van"
Professional Member
Regular Guest
If you really mean a "Bios Update" for an NAE55xx, then you should contact the branch that provided the NAE.
There was a Bios update released back around the time of MSEA v1.2 and the release of MSEA v2.0. It was my understanding that the NAE update (from version 1.x to 2.0) AND the bios update (using a toold called "BiosUpdateTool" were free to all customers INCLUDING labor by the branch.
If yours never had its bios updated, I think the selling branch has done you a disservice.
If, however, your NAE was purchased after this time (if it came with v2.0 or later), then its unlikely that it needs its bios updated.
If you are actually looking for an UPGRADE (say, to v3.1) then you'll have to pay for it.
Posting Permissions
