Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2008

    field pressures?

    my hydron module 410HO50 is up and running, heating the house nicely. I was asked the other day what my field pressures were, looked on the lines and there are no pressure gages, is this something to be concerned about? My loop consits of 50' of line to a manifold that does 4 500' loops, two pumps run the system, any idea of what my pressures should be? loop is 6' down in the ground.

  2. #2
    Join Date
    Feb 2008
    anybody know what their pressures are?? And what is normal?

  3. #3
    Join Date
    Sep 2007
    Lucedale, Ms


    Your installing company should be able to give you all the information you are requesting. They know your system and your installation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event