Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2006

    filter-drier pressure drop.

    I was just wondering what kind of pressure drop across a filter-drier core you guys change the core. It seems that I remember reading that when it gets to 3 psi above the starting pressure drop, you should change it.

  2. #2
    Join Date
    Jul 2004
    I would change it at 3.

  3. #3
    Join Date
    Aug 2006
    Mixing oil and fire with a big spoon.
    These days, it depends. 3 psid is a good rule of thumb, for a constant refrigerant volume application. But what if you had a 1 psi drop but only 1 of 3 compressors running? It will be higher when all of the compressors are running so you may want to think about a lower number under certain conditions.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event