Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2007
    Location
    Bay Area, California
    Posts
    5

    Andover controls and Infinet

    Help appreciated.
    Can anyone tell me what the protocol Infinet is? Proprietary, LON, etc?

    Also, what integration capabilites do CX9680, BCX 9680 and CX9900 modules have? I am looking to integrate with a native BACnet system but do have LON capabilites.

    Thanks!

  2. #2
    Its a proprietary rs-485. There are AX Tridium Drivers for the infinet comm. I am sure there are other solutions as well.

    Freddy-b

  3. #3
    Join Date
    Aug 2007
    Location
    Bay Area, California
    Posts
    5

    Thank you

    Thanks freddy-b.

  4. #4
    Do you have an OPC client option? If so Andover has an OPC server that can be added. There is also a 3rd party Andover OPC server that works pretty well and is cheap. I don't remember where we found it but I'm sure I could dig up the info if needed. There is also an Andover Xdriver that says it supports BACnet Ethernet (non-IP) and BACnet/IP but I have not tried it.

  5. #5
    Join Date
    Sep 2006
    Posts
    5
    You may want to look into the NC2 Controller with a Xdriver

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event