Results 1 to 4 of 4

Thread: CCN Problems

  1. #1
    Join Date
    Dec 2007
    Location
    Deltona, FL.
    Posts
    4

    CCN Problems

    We have a CCN that we have had pretty good luck with for the last few years. But now, we have replaced one of the fan coil boards. Since this is a newer version (2.2 to 3.0) we had to blow out the program and manually add everything. The only problem is we can not force any setpoints, we get CCN access denied, but only on this board, all the others still respond correctly. Anybody have any ideas? Thanks.
    Last edited by jjcooler; 12-17-2007 at 10:52 PM.

  2. #2
    Join Date
    Dec 2007
    Location
    Deltona, FL.
    Posts
    4
    a

  3. #3
    Join Date
    Mar 2007
    Location
    Melbourne,Aus
    Posts
    346
    I assume that you are using ComfortView frontend software??

  4. #4
    Join Date
    Dec 2007
    Location
    Deltona, FL.
    Posts
    4
    Yes we are, But today I spent all day messing around with the software. I finally figured out what we were doing wrong. As we changed values, we weren't downloading it to the controller. Oh well, live and learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event