Niagara AX Mcquay OPM Driver Open Protocol Data Information Packet

[rikenz]

Hello,
I have a Mcquay RFS135CLY Rooftop Air Handler that I'm trying to integrate into Niagara AX. I have a JACE with the Mcquay OPM driver and I'm setting up the station. As points needs to be manually added in the driver (no discovery mode) I need the point table for the unit. It appears there is a Open Protocol Data Information Packet for each piece of Mcquay equipment but I can't seem to find one for the RFS135CLY. Any help would be extremely appreciated!

R

[tjmustangtj]

I have the following doc for a Mc Quay chiller, send me your email address and I will send it to you. You can also try to call Daikin McQuay, 866.462.7829 but I have never had good luck with them providing information when trying to use OPM driver.

MicroTech® Reciprocating Chiller
(American Manufacture)
Open Protocol™ Data Communications
Information Packet
Version 5.0
April, 1996

[rikenz]

I have the following doc for a Mc Quay chiller, send me your email address and I will send it to you. You can also try to call Daikin McQuay, 866.462.7829 but I have never had good luck with them providing information when trying to use OPM driver.

MicroTech® Reciprocating Chiller
(American Manufacture)
Open Protocol™ Data Communications
Information Packet
Version 5.0
April, 1996

Thank you, Daikin came through yesterday and emailed me the pdf. They did however say that it was Tridium who was supposed to provide this information.

R

[t-reck]

Take at look at this FieldServer Document:

http://www.fieldserver.com/docs/pdf/...-80_McQuay.pdf

They have several OPM data maps in there.