Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2003
    Chicago, IL
    Post Likes

    Not so easy EZ Trap

    Found this on a check up on a water source heat pump in a condo.

    Name:  image-3071434616.jpg
Views: 1377
Size:  482.6 KB

    Showed the pic to the homeowner and told them what was wrong with it. They said it was installed by another contractor after the ceiling collapsed due to a plugged drain.

    Ended up having to install a new EZ Trap kit because the float had been glued into the side of this one

  2. #2
    Join Date
    Jan 2014
    Mesa, Arizona
    Post Likes
    Glued..... Hahaha. I can just imagine that same tech who installed it coming back wondering why the system isn't cooling because the float is stopping voltage. Smh

    We all make choices, but in the end our choices make us.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.