Page 3 of 3 FirstFirst 123
Results 27 to 31 of 31
  1. #27
    Join Date
    May 2006
    Posts
    385
    norm house around my area is 60 to 80 you use a reducer valve but keep it set at the units min pressure.

  2. #28
    Join Date
    Jul 2011
    Posts
    64
    Ok I was about to say.


    Anyways today was a day of great success! Installed the motor in and tested it freestanding with water and running and I underestimated the power of it LOL

    https://www.youtube.com/watch?v=idr1uX5xc4k
    https://www.youtube.com/watch?v=dl0SNVAMxBg

  3. #29
    Join Date
    May 2006
    Posts
    385
    you used painters tape is why that stuff don't stick for ****.
    duct tape would hold
    good to see it working again

  4. #30
    Join Date
    May 2006
    Posts
    385

    Hobart WM-1D Dishwasher

    at the end it should have drained all the water out on its own.
    my unit pumps it out when the drain valve opens via tell tale click then you hear the water pumping out.
    show us how it works when installed again

  5. #31
    Join Date
    Jul 2011
    Posts
    64
    I disabled it because I did not want it to drain

    Sent from my SPH-L720 using Tapatalk

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event