Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2007
    Location
    Columbus, OH
    Posts
    25

    Configuring Johnson FX10 Controller

    I have a job that has heat pumps controlled by the FX10. When the heat pumps arrived on site, the instance id was pre-programmed into the controller. The site owner wants to use a specific numbering scheme, and they must be redone.

    From what I can determine, I can use the Johnson FX Tools software to accomplish this in the field.

    Can anyone verify this? I have been transferred around my local Johnson Controls office all afternoon trying to find a response.

    Thanks

    -Mike

  2. #2
    Join Date
    Jul 2007
    Location
    Mount Airy, MD
    Posts
    7,278
    Do you mean FX40??? I don't believe there is an FX10, just took a peek a jci.com, couldn't find such an animal....

  3. #3
    Join Date
    Mar 2005
    Location
    Redding, CA
    Posts
    45
    My understanding is the 10's are OEM only and not available to the ABCS's.

    Also, unless you have the program file from the mfgr and the customer ID you won't be able to do anything with it, as far as I know.

    Wish I had better news for you.

  4. #4
    Join Date
    May 2007
    Location
    New Orleans, La.
    Posts
    141

    FX10's

    The FX10's are in fact OEM and probably came with the Heat Pump. The instance ID identifies the OEM. You can get with tech support and they can possibly tell you how to change them



    Quote Originally Posted by ac-inc View Post
    I have a job that has heat pumps controlled by the FX10. When the heat pumps arrived on site, the instance id was pre-programmed into the controller. The site owner wants to use a specific numbering scheme, and they must be redone.

    From what I can determine, I can use the Johnson FX Tools software to accomplish this in the field.

    Can anyone verify this? I have been transferred around my local Johnson Controls office all afternoon trying to find a response.

    Thanks

    -Mike

  5. #5
    Join Date
    Jul 2007
    Location
    Columbus, OH
    Posts
    25
    Thanks for the comments. It looks like I will just have to wait until I hear back from the local Johnson Controls people. Hopefully, their tech support can provide the info I need.

    -Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event