Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2003
    Location
    Cochrane, AB
    Posts
    689
    Post Likes

    Strange Yellow Jacket 3/8" charging hose failure.

    I ran into this issue last night with a co-worker. We were having issues pulling a vacuum and transferring liquid on a supermarket rack and finally narrowed it down to a restriction in a 5ft charging hose. When we cut the hose in half, and then length wise, the entire length of the inner hose liner was collapsed on itself and blocking flow. This hose is 5 or 6 years old and has been used maybe 10 times total, including the night before, without any problems.

    Any theories on what happened?

    Name:  2014-03-06 01.21.12.jpg
Views: 1635
Size:  76.7 KB

  2. #2
    Join Date
    Mar 2007
    Location
    In the Conservatory with a Lead Pipe
    Posts
    13,311
    Post Likes
    I had a similar thing happen to a 1/2 appion

    Couldn't get flow and thought something was stuck
    Sent a wire down it to see where it was blocked and it went end to end no problem lol
    Went back to check flow and nothing
    Weird problem if you haven't seen that before

  3. #3
    Join Date
    Mar 2010
    Posts
    2
    Post Likes
    Never had a problem like that. Mine usually start leaking around the ends. I use my hoses a lot on supermarket racks too

    Sent from my QMV7A using Tapatalk

  4. #4
    Join Date
    Mar 2007
    Location
    In the Conservatory with a Lead Pipe
    Posts
    13,311
    Post Likes
    FWIW Appion took care of my hose very quick with out issue.

  5. #5
    Join Date
    Jul 2012
    Posts
    2,319
    Post Likes
    Not sure why you are using 1/4" hoses to evacuate? That must take a long time. I have had some hose failures just like what you describe. I have one that refrigerant will barely pass through.

  6. #6
    Join Date
    Jan 2014
    Location
    Jacksonville, FL 32259
    Posts
    311
    Post Likes
    Not the same, but similar.

    I had the exact thing happen to my 1 year old Ace Hardware never kink garden hose last week. Whole inner hose collapsed.
    Took it to the store and they replaced with new hose.

  7. #7
    Join Date
    Jul 2012
    Posts
    2,319
    Post Likes
    Quote Originally Posted by Quick Carl View Post
    Not the same, but similar.

    I had the exact thing happen to my 1 year old Ace Hardware never kink garden hose last week. Whole inner hose collapsed.
    Took it to the store and they replaced with new hose.
    Lmao

  8. #8
    Join Date
    Jul 2012
    Posts
    2,319
    Post Likes
    Maybe yellow jacket will sfart making "pocket hose charging hoses". The hose. that grows !!!!

  9. Likes drpeel, Lidecharr liked this post
  10. #9
    Join Date
    Mar 2017
    Posts
    28
    Post Likes
    What an interesting failure. I have heard of a flap coming loose in brake lines creating a check valve that drives technicians crazy.

  11. #10
    Join Date
    Jun 2014
    Location
    Or
    Posts
    34
    Post Likes
    I have IH 2.5 ton truck. The main rubber vacuum line from the manifold to the hydrovac delaminated when only braking hard. Took awhile to find that.

    Some vehicles have exhaust pipes that have two layers. They can have clogging problems. The inside layer collapses.

  12. #11
    Join Date
    Feb 2016
    Posts
    10
    Post Likes
    I use S.S flared head hose for my vacuuming on large units . Usually 1/2" flared . And I am using medical vacuum pumps two stage rotary vane pumps such as Edwards28, Alcatel- Adixen 2021I[/I] or Varian DS602 range between 14-18 CFM , tested to 6 micron . I'll bring down my vacuum in some cases to 15-20 microns , and hold it on 250 -400 microns . Due to rubber hose out-gasing its really difficult to set your micron range correct . Now we have these VRF systems all over the town with hell of developed length of ref lines and our conventional vacuum pumps are not meant to do these tasks . As far as conventional vacuum pump I didnt see any better pump than J.B DV-285N 10 CFM .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.