Results 1 to 3 of 3
Thread: Jace WEB alarm Display
10-10-2007, 12:43 PM #1
Jace WEB alarm Display
I have a Tridium jace 501 running R2. When I do the WEB graphics pages I set a URL link to the alarm display (http:/Jace IP/alarm/alarmDisplay). The unacknowledged alarms screen pops up fine but it will only display 2 and maybe 3 alarms at a time. The new alarms simply overright the old alarms and the old alarms simply disappear without being acknowleded. Even the summary screen only shows 2 alarms at a time. How do I get more alarms to display on the screen. I want to see all the unacknowledged alarms.
10-10-2007, 01:02 PM #2
Disreguard the first post. I answered my own question. If the alarms are coming from the same point it overrights the first alarm. If the alarm is from a different point then displays properely. I was thinking it treated each alarm as a seperate incident.
10-10-2007, 05:55 PM #3
<irony> Glad I could help! </irony>
I had the same problem a while back! It just looks a bit strange, Doesn't it!gnomethang
"Once men turned their thinking over to machines in the hope that this would set them free. But that only permitted other men with machines to enslave them."
- The Reverend Mother Gaius Helen Mohiam