Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2008
    Posts
    508

    Siemens Slope/Intercept

    does anyone have any written information as to how slope and intercept is calculated in different siemens controllers?

  2. #2
    Join Date
    Aug 2013
    Location
    Halifax, Nova Scotia, Canada
    Posts
    32
    in insight, drag and drop the point in point editor. mid way down on the left is where you set the slope and intercept. click on the ... button, select the sensor/signal type and define the range - click calculate, click ok, and it will populate the values in the correct areas, save point.

  3. #3
    Join Date
    Aug 2013
    Location
    Halifax, Nova Scotia, Canada
    Posts
    32
    if using a terminal emulator (ie hyper terminal), point, edit, modify, enter the point name, adjust fields accordingly. Have to manually determine the slope and intercept though and manually enter the values.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event