Over the last few months my supervisor has asked me to look at a few modulating luxaire furnaces that he installed for clients. He's only installed four of these particular models and all were installed late last winter. This year three of them have had issues. Truthfully I don't have much experience with these luxaire modulating furnaces. The issues with these furnaces were - two faulty transducers and one faulty board. I'm was considering putting one of these in at my mothers home on till these issues. I know a lot of these have been installed in the last few years. Is this just a coincidence or have others noticed reoccurring issues with them? When i called the York help line to confirm the issues with the Transducer on the first furnace the gentleman on the phone told me to pick up a couple of the transducers which set off a red flag, then I needed it a few weeks later. Any thoughts?