Results 1 to 3 of 3
  1. 09-12-2007, 08:46 PM #1
    william smith
    william smith is offline Regular Guest
    Join Date
    Sep 2007
    Posts
    17

    vulcan hartt fryer

    How would you check a milivolt gas valve for ground
    Reply With Quote Reply With Quote
  2. 09-16-2007, 09:34 AM #2
    FloridaAR
    FloridaAR is offline New Guest
    Join Date
    Sep 2007
    Posts
    2
    One terminal to ground. If it is a Robert Shaw unitrol with the pilot magnet; then approx. 10 ohms. The main valve is less than 1 ohm accross it. Hope that helps.
    Reply With Quote Reply With Quote
  3. 09-16-2007, 08:35 PM #3
    william smith
    william smith is offline Regular Guest
    Join Date
    Sep 2007
    Posts
    17
    Quote Originally Posted by FloridaAR View Post
    One terminal to ground. If it is a Robert Shaw unitrol with the pilot magnet; then approx. 10 ohms. The main valve is less than 1 ohm accross it. Hope that helps.
    thank you i called robertshaw and that is correct
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules