Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2007
    Location
    North Little Rock, AR
    Posts
    19

    Grill and register specs for airflow testing?

    Just recently baught a anemometer and per the instructions found the specs for some common Hart and Cooley floor and ceiling registers.

    Floor:

    4 x 10 .170
    4 x 12 .195
    6 x 10 .240
    6 x 12 .285


    Ceiling:

    6 x 10 .180
    6 x 12 .340
    6 x 14 .400


    These are the numbers I enter into my meter to give me the CFM single area reading. Does anyone else know where I can find specs for other manufaturer's registers and grills?



    S

  2. #2
    Ask for engineenering book from other register manufacture that you want. Thats the only way I know of.

  3. #3
    Join Date
    Jul 2007
    Location
    North Little Rock, AR
    Posts
    19
    Quote Originally Posted by falkenater View Post
    Ask for engineenering book from other register manufacture that you want. Thats the only way I know of.
    Thanks.



    S

  4. #4
    Join Date
    Jun 2001
    Location
    Louisville, KY
    Posts
    12,189
    Shoemaker has engineering data like H&C. As posted, talk to your sales rep. He should have catalogs with the information you desire.
    Perhaps you should have read the instructions before calling.

  5. #5
    Join Date
    Jul 2007
    Location
    North Little Rock, AR
    Posts
    19
    Quote Originally Posted by jrbenny View Post
    Shoemaker has engineering data like H&C. As posted, talk to your sales rep. He should have catalogs with the information you desire.
    Thank you very much,


    S

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event