I have a Trane TSC120E4R0B.
Based on the Model Number Description - Digit 10 - deals with Heating Capacity. This units list 0 = No Electric Heat
My question is can this unit be modified to add a BAYHTRA418A - 18kw electric heater.
Its a 460/3/60 with a 60 amp fused disconnect. Its runs off a basic Honeywell T-stat.
1 - can this unit be easily modified to add the heater
2 - would this possibly require modifications to the duct detector that's tied into my fire protection system.
The orginal unit installed per the drawings showed a 19.6kw heater in it. I'm unsure why this wasn't done when this unit was replaced. This was done before I got involved.
Any assistance would be helpful.