Results 1 to 7 of 7
Thread: Hobart dough mixer H-600T
-
06-03-2007, 09:51 AM #1
Professional Member
- Join Date
- Oct 2005
- Posts
- 58
Hobart dough mixer H-600T
I have been trying to take out the broken pin (holds the dough mixing hook) with no luck.Tried almost everything heating it, tried to drill it with carbide drill,WD-40. Checked with vernier caliper its not taper pin. Hobart is not giving any information. Sr no is 99-217-742. Any help will be appreciated.
-
06-04-2007, 02:48 PM #2
Member
- Join Date
- Apr 2005
- Location
- Central Indy
- Posts
- 153
you have to remove the plug screw and the two set screws under the plug screw before you can drive the pin out. If you tried drilling it , you may have to replace the agitator shaft
Hope this helps
-
06-05-2007, 07:32 AM #3
Professional Member
- Join Date
- Oct 2005
- Posts
- 58
Thanks anyway I did remove both set screws
-
06-09-2007, 09:22 AM #4
Professional Member
- Join Date
- Jul 2004
- Location
- midlands of the uk
- Posts
- 144
dough mixer
no help from hobart now there is a surprise
sell you a new one sir !There is faith, there is hope and then there is another compressor change
-
06-17-2007, 02:21 PM #5
Professional Member
- Join Date
- Mar 2007
- Location
- Regina SK Canada
- Posts
- 20
remove the planetary and press it out. That is the only way that worked for me. remove the oil in the planetary first. reinstall and add new oil.it takes about 6 oz.
-
07-06-2007, 10:18 PM #6
Professional Member
- Join Date
- Feb 2007
- Location
- Manor, Texas
- Posts
- 42
use a angle grinder and just slightly grind the part of the pin thats sticking out. then you can get the rest out.
-
01-11-2008, 06:14 PM #7
New Guest
- Join Date
- Jan 2008
- Posts
- 2
Mixer Year
Please pardon the interuption but while you are on the subject, does anyone know how to identify the year of manufacture of a Hobart H600-T?
Reply With Quote
