Results 1 to 7 of 7
  1. #1
    Join Date
    Oct 2005
    Posts
    58

    Hobart dough mixer H-600T

    I have been trying to take out the broken pin (holds the dough mixing hook) with no luck.Tried almost everything heating it, tried to drill it with carbide drill,WD-40. Checked with vernier caliper its not taper pin. Hobart is not giving any information. Sr no is 99-217-742. Any help will be appreciated.

  2. #2
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    you have to remove the plug screw and the two set screws under the plug screw before you can drive the pin out. If you tried drilling it , you may have to replace the agitator shaft Hope this helps

  3. #3
    Join Date
    Oct 2005
    Posts
    58
    Thanks anyway I did remove both set screws

  4. #4
    Join Date
    Jul 2004
    Location
    midlands of the uk
    Posts
    144

    dough mixer

    no help from hobart now there is a surprise

    sell you a new one sir !
    There is faith, there is hope and then there is another compressor change

  5. #5
    Join Date
    Mar 2007
    Location
    Regina SK Canada
    Posts
    20
    remove the planetary and press it out. That is the only way that worked for me. remove the oil in the planetary first. reinstall and add new oil.it takes about 6 oz.

  6. #6
    Join Date
    Feb 2007
    Location
    Manor, Texas
    Posts
    43
    use a angle grinder and just slightly grind the part of the pin thats sticking out. then you can get the rest out.

  7. #7

    Mixer Year

    Please pardon the interuption but while you are on the subject, does anyone know how to identify the year of manufacture of a Hobart H600-T?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event