Results 1 to 13 of 31
-
06-02-2007, 10:06 PM #1
Professional Member
- Join Date
- Mar 2005
- Location
- Phoenix, AZ
- Posts
- 636
Attention ALL Service Techs: Service THIS!
I didn't do it!
-
06-02-2007, 10:58 PM #2
Professional Member*
- Join Date
- Apr 2006
- Location
- South West Ohio
- Posts
- 362
That was done by an installer that has never done any service!
-
06-02-2007, 11:01 PM #3
Professional Member
- Join Date
- Mar 2005
- Location
- Phoenix, AZ
- Posts
- 636
I'd like to know how they plan on painting the wall. It's still bare grey stucco.
-
06-02-2007, 11:43 PM #4
Professional Member*
- Join Date
- Mar 2004
- Location
- Grottoes VA
- Posts
- 5,857
The wall installers moved the unit closer to the house.
Karst means cave. So, I search for caves.
-
06-02-2007, 11:52 PM #5
Professional Member
- Join Date
- Oct 2006
- Location
- houston
- Posts
- 77
that is why i have a small 5/16 ratchet in my bag ; 20 minutes to get the cover off. if the condensers looked that bad what did the furnaces look like?
-
06-03-2007, 12:10 AM #6
Professional Member
- Join Date
- Apr 2003
- Location
- arizona
- Posts
- 629
new construction at its best, is that a chainsaw charlie job ?
-
06-03-2007, 12:10 AM #7
Professional Member
- Join Date
- Sep 2001
- Location
- kalamazoo,mich
- Posts
- 2,174
Oh come on, everybody knows that those blue oval units don't ever break.............
Have you hugged the Earth today?
Donny Baker rules
-
06-03-2007, 12:49 AM #8
Regular Guest
- Join Date
- Apr 2007
- Location
- northern cal
- Posts
- 6
nice pads
-
06-03-2007, 01:19 AM #9
Professional Member
- Join Date
- Mar 2005
- Location
- Phoenix, AZ
- Posts
- 636
Oh come on you don't need pads in arizona. It never rains here. There's no moisture. LIKE that ground will ever settle, or that brick ever move. Come on 25 years from now there will still have been next to no rain. You don't need condenser pads.
Code specifically states "minimum 3 inches above grade" THIS QUALIFIES! Hilarious as it may seem.
-
06-03-2007, 03:53 PM #10
Professional Member
- Join Date
- Dec 2005
- Location
- Outer Banks, NC
- Posts
- 193
Around here the power company would be on the phone to the inspector.
-
06-03-2007, 05:49 PM #11
Professional Member
- Join Date
- Mar 2007
- Location
- Orange County NY
- Posts
- 211
Excuse me, I'll me right back I have to get a part.
-
06-03-2007, 08:08 PM #12
Professional Member
- Join Date
- Dec 2001
- Location
- Phoenix, Az
- Posts
- 1,168
Hey Rifter, that wouldn't be the work of the biggest Carrier dealer in town would it?
-
06-03-2007, 09:30 PM #13
Professional Member
- Join Date
- Oct 2006
- Location
- houston
- Posts
- 77
Does chainsaw charlie have any brands that he doesnt install, I have seen pics of bad Carrier installs, bad trane installs has any other dealers ever considered getting his dealership revoked or having a disgruntled h/o sueing the manufacter along with him due to a substandard install? I worked for a new construction company in Houston that did a substandard install on a upper end custom home that had extensive mold damage caused by the installation contractor by either a drainage problem or drastic oversizing, my info came from the manufacter's lawyer so the specifics were not clear but in the end the general contrator, hvac installation contractor and the manufacturer were all sued by the homeowner and it almost caused the HVAC contractor a name brand dealership
Reply With Quote
