Results 1 to 2 of 2

Thread: Turbo Trouble

  1. #1
    Join Date
    Aug 2008
    Parts Unknown

    Turbo Trouble

    I have a WMC with two TT300 compressors curcuit 2 runs fine but curcuit 1 will not generate a alarm but will not come on I hooked up my lap top and found out that the compressor control type goes to calibration mode if there is a power glitch or someone cycles the power, I can change it back to modbus and the compressor takes off untill the next power trouble, it reminds me of a failed bram. Any suggestions.

  2. #2
    Join Date
    Feb 2003
    Wichita Ks
    if the BMCC had to be put back to Modbus then your will more than likely have to replace the BMCC. You will need to contact TRC or go to Mcquay. Hopefully it is still warranty.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event