Results 1 to 13 of 15

Hybrid View

  1. #1
    Join Date
    Jun 2007
    Posts
    4

    frymaster filter pump motor change out

    please give me any ideas or indian tricks, i will be changing one out next week.. the pump and motor sit sideways at the far back of the fryer and i can not get to it from the back i have to lay under where the filter cart sets , omg... i have changed out pumps before and that was bad enough.... this looks like a pain in my already sore @#$!!!!!
    any ideas from any one who has done it?

  2. #2
    Join Date
    Apr 2007
    Posts
    6
    I would do whatever it takes to pull that unit out and go in from the back.Mcdonalds has to be serviced usually after 12.00am.If the fryer went in there's a way to pull it out.

  3. #3
    Join Date
    Jun 2005
    Location
    NY
    Posts
    13
    post up the model/serial number, if its the one i m thinking of, the entire shelf the motor and pump sits on unbolts so you can work on it a little easier, if i remember right. been a while since i ve done one where the motor isnt on the filter cart

  4. #4
    Join Date
    Aug 2005
    Location
    iowa
    Posts
    1,649
    the last frymaster i did, part of the back came off. it still wasnt easy but better than laying on your back in all that gack! guess yours could be differant.

  5. #5
    Join Date
    Jun 2007
    Posts
    4

    thanks

    thanks for the input... i will let you know how it goes.... some days i really like this job.... some days i dont.

  6. #6
    Join Date
    Aug 2005
    Location
    iowa
    Posts
    1,649
    cmon now!!

    everyday is a fun day!












    say it with me now!

  7. #7
    Join Date
    Jun 2007
    Location
    roswell nm
    Posts
    1

    Post Better You This Time Than Me

    www.frymaster.com/iframe.asp?...
    pull up your fryer and look and see if there are any service tricks you can see

  8. #8
    Join Date
    Jun 2007
    Posts
    4

    mission accomplished

    got the motor out,,, turns out it could have been worse... fyi....the motor mounts to a cross bar this bar is held on by four bolts they also adjust the hight of the motor so the filter cart will line up ... take them all out and the motor will come out....... wigle wigle etc. un mount the motor and put it all back in .. there is a trick to geting it in i can let you know if you ever need to know it..
    on to more adventures !!!!!!!
    see ya all later .

  9. #9
    Join Date
    Nov 2003
    Location
    Wisconsin
    Posts
    458
    Quote Originally Posted by rluke777 View Post
    got the motor out,,, turns out it could have been worse... fyi....the motor mounts to a cross bar this bar is held on by four bolts they also adjust the hight of the motor so the filter cart will line up ... take them all out and the motor will come out....... wigle wigle etc. un mount the motor and put it all back in .. there is a trick to geting it in i can let you know if you ever need to know it..
    on to more adventures !!!!!!!
    see ya all later .
    I work for a McD franchisee and change those things all the time. The only real trick is to use a hydraulic type roller jack to get the new one in place so you're not trying to hold 40 lbs. with left hand and lining everything up with the right.

  10. #10
    Join Date
    Nov 2003
    Location
    Wisconsin
    Posts
    458
    Ditto

  11. #11
    I need to pick up a replacement pump / motor and this one matches my specs :

    Baldor 34G040Y214G1 Frymaster 8261756 motor .33 hp new

    Do you guys think this is a good deal? Cheapest I've been able to find online is almost twice as much. I've never bought anything off ebay before. What do you guys think?

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event