Finally bought me a new machine got tired of fixing junk, only problem is I think hozys are kind of over rated
I know a KM600 is a 500 lb machine but this makes 10lbs every 44mins do the math, its not even close
I also have alot of minerals in the water but I think it should do a little better ambient 80 to 85 on average.
I also rigged a 5ton heat exchanger water condenser and ran my purge water through it in opposite directions but it did not make a big differnce.
what I need is suggestions we have some km 600 s out here at work but I have never had to work on one because they are so dependble PMs have been eliminated to run to fail typical GOVERMENT.