+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 20 of 35

Thread: NOBODY GOES TO THIS FORUM

  1. #1
    Join Date
    Sep 2004
    Posts
    13,938
    Post Likes

    NOBODY GOES TO THIS FORUM

    MY WIFE MADE ME A GREAT STEAK FOR DINNER!
    true knowledge exists in knowing that you know nothing.

  2. #2
    Join Date
    Nov 2002
    Posts
    263
    Post Likes
    Quote Originally Posted by supertek65 View Post
    MY WIFE MADE ME A GREAT STEAK FOR DINNER!
    Ugh. Cannabalism!
    Matt Michel
    Service Roundtable
    www.serviceroundtable.com

  3. #3
    Join Date
    Nov 2003
    Location
    Wisconsin
    Posts
    458
    Post Likes
    Great. I had to make my own . Wife don't do steak.
    In my many years I have come to a conclusion that one useless man is a shame, two is a law firm, and three or more is a congress. John Adams

    The whole aim of practical politics is to keep the populace alarmed (and hence clamorous to be led to safety) by menacing it with an endless series of hobgoblins, all of them imaginary. H. L. Mencken

    "Life's tough......It's even tougher if you're stupid."
    -John Wayne

  4. #4
    Join Date
    Sep 2004
    Posts
    13,938
    Post Likes
    Thread Starter
    Quote Originally Posted by rango View Post
    Great. I had to make my own . Wife don't do steak.
    i see you are from wisconsin.

    try the prime rib at the freight house in la crosse
    true knowledge exists in knowing that you know nothing.

  5. #5
    Join Date
    Mar 2004
    Location
    Illinois
    Posts
    6,958
    Post Likes
    Quote Originally Posted by matt michel View Post
    Ugh. Cannabalism!
    My name is Senior Tech...and I'm a cannibal

  6. #6
    Join Date
    Mar 2007
    Location
    State of Confusion
    Posts
    1,225
    Post Likes
    A Steak isn't a Steak unless its cooked on the grill.

  7. #7
    Join Date
    Nov 2003
    Location
    Wisconsin
    Posts
    458
    Post Likes
    Wife and I will be there in June. We'll try it. Thanx
    In my many years I have come to a conclusion that one useless man is a shame, two is a law firm, and three or more is a congress. John Adams

    The whole aim of practical politics is to keep the populace alarmed (and hence clamorous to be led to safety) by menacing it with an endless series of hobgoblins, all of them imaginary. H. L. Mencken

    "Life's tough......It's even tougher if you're stupid."
    -John Wayne

  8. #8
    Join Date
    Apr 2005
    Location
    N. E. Missouri
    Posts
    8,487
    Post Likes
    Quote Originally Posted by Senior Tech View Post
    My name is Senior Tech...and I'm a cannibal
    My name is mrs reb and I too am a cannibal. I've been a cannibal for more than 40 years. I don't think there's a cure.
    Do not argue with an idiot. He will drag you down to his level and beat you with experience.

  9. #9
    Join Date
    Dec 2004
    Posts
    6
    Post Likes
    st65 ,steak?Thought you were in the "rabbit food club"

  10. #10
    Join Date
    Sep 2004
    Posts
    13,938
    Post Likes
    Thread Starter
    Quote Originally Posted by airdesigngardner View Post
    st65 ,steak?Thought you were in the "rabbit food club"
    Charles!
    I see you have one post!!!!!!!!!!!!!!!!!!!!
    you are quite the social butterfly!
    why didnt you post a thread abou the rm 7800 problem you were having?



    st65
    true knowledge exists in knowing that you know nothing.

  11. #11
    Join Date
    Nov 2003
    Location
    Montreal, Qc.
    Posts
    917
    Post Likes
    Quote Originally Posted by rango View Post
    Great. I had to make my own . Wife don't do steak.
    I don't do Wife, I had to make my own.



















    Edit: That should have said "I don't have Wife, I had to make my own.

  12. #12
    Join Date
    Dec 2004
    Posts
    6
    Post Likes
    ok st65 i will in the boiler forum.Dont judge me by my lack of post!im not a loudmouth like you!

  13. #13
    Join Date
    Dec 2004
    Posts
    6
    Post Likes
    just for kicks and another "post" i guess i could share here also.rm 7800 on a direct fired paint booth.Have a code "2" noise a/c".checked all ground points and neutrals,all are bright and shiny.ran a new neutral and ground all the way up to the sub-base of the 7800.also ran a new "hot" to sub-base on a old extension cord and tried it at 2 seperate outlets on 2 seperate circuits.then i took the 7800 to jones and had it bench tested which of course it ran flawless.I was pulled off the job so thats as far as i have gotten so far.any ideas?I think next i will isolate the ignition coil and the 24v. transformer because they share the same 120v. circuit. after that im stumped!

  14. #14
    Join Date
    Sep 2004
    Posts
    13,938
    Post Likes
    Thread Starter
    Quote Originally Posted by airdesigngardner View Post
    just for kicks and another "post" i guess i could share here also.rm 7800 on a direct fired paint booth.Have a code "2" noise a/c".checked all ground points and neutrals,all are bright and shiny.ran a new neutral and ground all the way up to the sub-base of the 7800.also ran a new "hot" to sub-base on a old extension cord and tried it at 2 seperate outlets on 2 seperate circuits.then i took the 7800 to jones and had it bench tested which of course it ran flawless.I was pulled off the job so thats as far as i have gotten so far.any ideas?I think next i will isolate the ignition coil and the 24v. transformer because they share the same 120v. circuit. after that im stumped!

    i am sure if you posted this on the commercial hvac board you would already have an answer!

    lol

    st65
    true knowledge exists in knowing that you know nothing.

  15. #15
    Join Date
    Aug 2006
    Location
    Wisconsin
    Posts
    1,513
    Post Likes
    Quote Originally Posted by airdesigngardner View Post
    just for kicks and another "post" i guess i could share here also.rm 7800 on a direct fired paint booth.Have a code "2" noise a/c".checked all ground points and neutrals,all are bright and shiny.ran a new neutral and ground all the way up to the sub-base of the 7800.also ran a new "hot" to sub-base on a old extension cord and tried it at 2 seperate outlets on 2 seperate circuits.then i took the 7800 to jones and had it bench tested which of course it ran flawless.I was pulled off the job so thats as far as i have gotten so far.any ideas?I think next i will isolate the ignition coil and the 24v. transformer because they share the same 120v. circuit. after that im stumped!
    Hey this is steak talk. Don't be talking like that here

  16. #16
    Join Date
    May 2001
    Location
    Bennington, Vermont U.S.A.
    Posts
    13,856
    Post Likes
    [QUOTE=I see you have one post!!!!!!!!!!!!!!!!!!!!
    you are quite the social butterfly!
    why didnt you post a thread abou the rm 7800 problem you were having?
    st65[/QUOTE]


    Quote Originally Posted by airdesigngardner View Post
    just for kicks and another "post" i guess i could share here also.rm 7800 on a direct fired paint booth.Have a code "2" noise a/c".checked all ground points and neutrals,all are bright and shiny.ran a new neutral and ground all the way up to the sub-base of the 7800.also ran a new "hot" to sub-base on a old extension cord and tried it at 2 seperate outlets on 2 seperate circuits.then i took the 7800 to jones and had it bench tested which of course it ran flawless.I was pulled off the job so thats as far as i have gotten so far.any ideas?I think next i will isolate the ignition coil and the 24v. transformer because they share the same 120v. circuit. after that im stumped!

    You kids play nice. Don't make me come out there.

  17. #17
    Join Date
    May 2001
    Location
    Bennington, Vermont U.S.A.
    Posts
    13,856
    Post Likes
    Quote Originally Posted by hvac_superman View Post
    Hey this is steak talk. Don't be talking like that here

    Talking about steak, I made my favorite breakfast yesterday. Steak, eggs and home fries. London Broil sliced real thin. Hmmmmmmm........

  18. #18
    Join Date
    Feb 2004
    Location
    New Mexico
    Posts
    14,090
    Post Likes
    Quote Originally Posted by benncool View Post
    Talking about steak, I made my favorite breakfast yesterday. Steak, eggs and home fries. London Broil sliced real thin. Hmmmmmmm........
    If you keep eating your cows you won't have any to make your ice cream.
    We are here on Earth to fart around ......Kurt Vonnegut

    You can be anything you want......As long as you don't suck at it.

    USAF 98 Bomb Wing 1960-66 SMW Lu49

  19. #19
    Join Date
    Sep 2004
    Posts
    13,938
    Post Likes
    Thread Starter
    Quote Originally Posted by hvac_superman View Post
    Hey this is steak talk. Don't be talking like that here
    mmmmmmmmmmmmmmmmmmmmmm!
    steak!
    true knowledge exists in knowing that you know nothing.

  20. #20
    Join Date
    Sep 2004
    Posts
    13,938
    Post Likes
    Thread Starter
    Quote Originally Posted by benncool View Post
    Talking about steak, I made my favorite breakfast yesterday. Steak, eggs and home fries. London Broil sliced real thin. Hmmmmmmm........
    mmmmmmmmmm nothing like the smell of london broil in the morning!
    thr only thing the British ever did right!
    true knowledge exists in knowing that you know nothing.

+ Reply to Thread
Page 1 of 2 12 LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •