Infinity Touch Control w/ WiFI (SYSTXCCITW01) Touch screen needs to be calibrated?
Results 1 to 3 of 3
  1. #1

    Infinity Touch Control w/ WiFI (SYSTXCCITW01) Touch screen needs to be calibrated?

    Hello Everyone,

    I just replaced my original Carrier Infinity System with the new Wifi version. After it went through searching for indoor unit, SAM module, Zones and Static Pressure Check...when I try to move around the screen...the screen is off, as if it needs to be calibrated. I can't find anything in the manual that shows how to re-calibrate the touch screen options so that when I tough dead-on it's not clicking on a different part of the screen. The right side of the screen isn't as bad as the left side...

    Any thoughts?

    Thank you,

    Alex

  2. #2
    Join Date
    May 2006
    Location
    Philadelphia, PA
    Posts
    1,373
    Never heard of that. Have your installer contact Carrier for assistance. Might be a defective UI
    Climate Control Solutions for your Home or Office

    Serving Northeast Philadelphia and Surrounding Areas

  3. #3
    Will do, was wondering if re-installing the firmware would help. I'm on version 9

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event