Results 1 to 10 of 10
  1. #1
    Join Date
    Jul 2013
    Posts
    29
    Post Likes

    harvest light stays on after cleaning

    Manatowoc. SY1894N3. S# 110931195
    Just cleaned but when I put back to ice units clean light stays on and does not work. Someone else was here and said it needs cleaning, there was some ice made, cleaned it and now clean light stays on,reset power few times but still nothing

  2. #2
    Join Date
    Oct 2011
    Location
    Chicagoland Area
    Posts
    5,143
    Post Likes
    Harvest light or clean light?
    Officially, Down for the count

    YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET

    I know enough to know, I don't know enough
    Liberalism-Ideas so good they mandate them

  3. #3
    Join Date
    Jul 2013
    Posts
    29
    Post Likes
    Sorry. Clean light

  4. #4
    Join Date
    Mar 2007
    Location
    wedged in freezer shelf
    Posts
    7,995
    Post Likes
    It will need to complete the clean cycle (locked in) before you can make ice. If you leave it in ice mode and the machine is ok it will re start after the clean cycle is over. There is a way out but it would be better if you let it finish not knowing how it was cleaned.

  5. #5
    Join Date
    Aug 2012
    Location
    willowick ,oh
    Posts
    261
    Post Likes
    officeoffice

  6. #6
    Join Date
    Mar 2007
    Location
    wedged in freezer shelf
    Posts
    7,995
    Post Likes
    Office!! Office!! LOL

  7. #7
    Join Date
    Aug 2012
    Location
    willowick ,oh
    Posts
    261
    Post Likes
    Lol. I know right

  8. #8
    Join Date
    Jul 2013
    Posts
    29
    Post Likes
    OK. Left it on ice and unit working. Thanks everyone appreciate it

  9. #9
    Join Date
    Aug 2012
    Location
    willowick ,oh
    Posts
    261
    Post Likes
    Next time just toggle the system switch from off to ice two times fast. That resets the control to go into a freeze cycle. Just funnier spelling it out like that. Lol. Sorry for the confusion

  10. #10
    Join Date
    Aug 2013
    Location
    Pennsylvania
    Posts
    50
    Post Likes
    thats handy to know. at first when he had said harvest stayed on then the clean light stayed on i thought it might be a itp or board issue

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech365 Virtual Event