RTHB Trane chiller

[bhollon5007]

This chiller has lock outs of momentary power loss, check clock, and transition complete input opened. I have not seen this before; is ther any suggestions

[Healey Nut]

This chiller has lock outs of momentary power loss, check clock, and transition complete input opened. I have not seen this before; is ther any suggestions

Call a qualified experienced tech farmiliar with the RTHB

[gbrlgms]

1)check the aux contacts on the run contactor or replace the aux contact(also check the starter mod)
2)check the high pressure switch,if you look at the wiring diagram of the starter panel
3)you will need to perform a dry run test on the starter panel using the ucp2 test mode.

[valdelocc]

Call a qualified experienced tech farmiliar with the RTHB

Why do you bother to post such useless comment? life must be pretty boring north of the border.

[jayguy]

Why do you bother to post such useless comment? life must be pretty boring north of the border.

graham does post this comment quite a bit more than the average tech, however, (in this case especially) several of the known possible fixes for this problem include putting your hands and tools in an open starter cabinet...this is not exactly something to teach someone over the internet with 1 post...unless he tried it after getting gbrlgms advice and now he may have only 1 post to his name forever!

[Healey Nut]

Why do you bother to post such useless comment? life must be pretty boring north of the border.

I posted it because the OP has no credentials in his profile and this is his first posting . Im not going to post information in an open forum that may end up with someone who doesnt have a clue what they are doing and has no place fooling around in a chiller starter getting killed .
Its about time that this became a pro only forum , there are far too many DIY ers and Jack of all Trades using this site for information and there are far to many people on here posting information that people should be paying for by hiring a licensed professional to fix .

There Im done my rant I shall now go back to my igloo and wait to see if I can shoot a moose and if I dont hurry my whale blubber lunch will spoil .

[Southern Mech]

I posted it because the OP has no credentials in his profile and this is his first posting . Im not going to post information in an open forum that may end up with someone who doesnt have a clue what they are doing and has no place fooling around in a chiller starter getting killed .
Its about time that this became a pro only forum , there are far too many DIY ers and Jack of all Trades using this site for information and there are far to many people on here posting information that people should be paying for by hiring a licensed professional to fix .

There Im done my rant I shall now go back to my igloo and wait to see if I can shoot a moose and if I dont hurry my whale blubber lunch will spoil .

You did not have to defend your statement.

[Southern Mech]

Why do you bother to post such useless comment? life must be pretty boring north of the border.

yet, you led him to water...didn't you.

[Nuclrchiller]

I posted it because the OP has no credentials in his profile and this is his first posting . Im not going to post information in an open forum that may end up with someone who doesnt have a clue what they are doing and has no place fooling around in a chiller starter getting killed .
Its about time that this became a pro only forum , there are far too many DIY ers and Jack of all Trades using this site for information and there are far to many people on here posting information that people should be paying for by hiring a licensed professional to fix .

There Im done my rant I shall now go back to my igloo and wait to see if I can shoot a moose and if I dont hurry my whale blubber lunch will spoil .

You call that a rant? Sometimes I miss the old Graham...

[bhollon5007]

thank you, I did find out that the bldg has been losing power and going into battery back up. My customer and the electrical company are in the process of setting a monitor to see if bldg or supply problem

[Healey Nut]

You call that a rant? Sometimes I miss the old Graham...

Like a fine wine things mellow with the years

[Nuclrchiller]

Like a fine wine things mellow with the years

For some reason the phrase "dust on the bottle", from a country song, comes to mind...

[bhollon5007]

I have updated my credentials. I did not intend to disrespect this forum. I agree that safety should be considered when passing along trade information. I stumbled onto this by accident; but thought what an awsome way to talk about and learn about the trade I have enjoyed for several years.

[Southern Mech]

I have updated my credentials. I did not intend to disrespect this forum. I agree that safety should be considered when passing along trade information. I stumbled onto this by accident; but thought what an awsome way to talk about and learn about the trade I have enjoyed for several years.

Get up your pro status and we will get you through a space launch.

As you have read not many myself included is going to put out vast knowledge on the open forum. To many guys in pickup with a set of gauges calling themselves industry professional s.

[valdelocc]

yet, you led him to water...didn't you.

And who invited you to the party?
Once upon the time hvac-talk was all about helping others, a friendly place, now we have a mob more interested in belittle and ridicule those that seek help.

[jayguy]

...now we have a mob more interested in belittle and ridicule those that seek help...

kinda like what you did? it still is a friendly space and it is about helping others but safety should always come first. i sometimes shudder at some of the things a few of the 'pro status' posters say!