Page 1 of 2 12 LastLast
Results 1 to 13 of 16
  1. #1
    Join Date
    Jul 2013
    Location
    Kentucky
    Posts
    3

    RTHB Trane chiller

    This chiller has lock outs of momentary power loss, check clock, and transition complete input opened. I have not seen this before; is ther any suggestions

  2. #2
    Join Date
    Mar 2004
    Location
    ottawa canada
    Posts
    2,022
    Quote Originally Posted by bhollon5007 View Post
    This chiller has lock outs of momentary power loss, check clock, and transition complete input opened. I have not seen this before; is ther any suggestions
    Call a qualified experienced tech farmiliar with the RTHB
    The 64 roars to life Whoo hoo ...shes a rolling chassis .
    You bend em" I"ll mend em" !!!!!!!
    I"m not a service tech.. I"m a thermodynamic transfer analyst & strategic system sustainability specialist
    Best Austin Healey In Show twice in 2013 .....All those hrs paid off .

  3. #3
    Join Date
    Oct 2010
    Posts
    28
    1)check the aux contacts on the run contactor or replace the aux contact(also check the starter mod)
    2)check the high pressure switch,if you look at the wiring diagram of the starter panel
    3)you will need to perform a dry run test on the starter panel using the ucp2 test mode.

  4. #4
    Join Date
    Nov 2004
    Location
    up in the hizzy
    Posts
    1,375
    Quote Originally Posted by Healey Nut View Post
    Call a qualified experienced tech farmiliar with the RTHB
    Why do you bother to post such useless comment? life must be pretty boring north of the border.

  5. #5
    Join Date
    Aug 2006
    Location
    Mixing oil and fire with a big spoon.
    Posts
    4,264
    Quote Originally Posted by valdelocc View Post
    Why do you bother to post such useless comment? life must be pretty boring north of the border.
    graham does post this comment quite a bit more than the average tech, however, (in this case especially) several of the known possible fixes for this problem include putting your hands and tools in an open starter cabinet...this is not exactly something to teach someone over the internet with 1 post...unless he tried it after getting gbrlgms advice and now he may have only 1 post to his name forever!
    my 1st time jumping out of a plane...http://youtu.be/Kv38G0MHsGo

  6. #6
    Join Date
    Mar 2004
    Location
    ottawa canada
    Posts
    2,022
    Quote Originally Posted by valdelocc View Post
    Why do you bother to post such useless comment? life must be pretty boring north of the border.
    I posted it because the OP has no credentials in his profile and this is his first posting . Im not going to post information in an open forum that may end up with someone who doesnt have a clue what they are doing and has no place fooling around in a chiller starter getting killed .
    Its about time that this became a pro only forum , there are far too many DIY ers and Jack of all Trades using this site for information and there are far to many people on here posting information that people should be paying for by hiring a licensed professional to fix .

    There Im done my rant I shall now go back to my igloo and wait to see if I can shoot a moose and if I dont hurry my whale blubber lunch will spoil .
    The 64 roars to life Whoo hoo ...shes a rolling chassis .
    You bend em" I"ll mend em" !!!!!!!
    I"m not a service tech.. I"m a thermodynamic transfer analyst & strategic system sustainability specialist
    Best Austin Healey In Show twice in 2013 .....All those hrs paid off .

  7. #7
    Join Date
    Dec 2010
    Location
    Down by the river
    Posts
    1,622
    Quote Originally Posted by Healey Nut View Post
    I posted it because the OP has no credentials in his profile and this is his first posting . Im not going to post information in an open forum that may end up with someone who doesnt have a clue what they are doing and has no place fooling around in a chiller starter getting killed .
    Its about time that this became a pro only forum , there are far too many DIY ers and Jack of all Trades using this site for information and there are far to many people on here posting information that people should be paying for by hiring a licensed professional to fix .

    There Im done my rant I shall now go back to my igloo and wait to see if I can shoot a moose and if I dont hurry my whale blubber lunch will spoil .
    You did not have to defend your statement.
    It's hard to stop a Trane. but I have made one helluva living keeping them going.

  8. #8
    Join Date
    Dec 2010
    Location
    Down by the river
    Posts
    1,622
    Quote Originally Posted by valdelocc View Post
    Why do you bother to post such useless comment? life must be pretty boring north of the border.
    yet, you led him to water...didn't you.
    It's hard to stop a Trane. but I have made one helluva living keeping them going.

  9. #9
    Join Date
    Aug 2009
    Location
    Prattville, Alabama
    Posts
    1,993
    Quote Originally Posted by Healey Nut View Post
    I posted it because the OP has no credentials in his profile and this is his first posting . Im not going to post information in an open forum that may end up with someone who doesnt have a clue what they are doing and has no place fooling around in a chiller starter getting killed .
    Its about time that this became a pro only forum , there are far too many DIY ers and Jack of all Trades using this site for information and there are far to many people on here posting information that people should be paying for by hiring a licensed professional to fix .

    There Im done my rant I shall now go back to my igloo and wait to see if I can shoot a moose and if I dont hurry my whale blubber lunch will spoil .
    You call that a rant? Sometimes I miss the old Graham...

  10. #10
    Join Date
    Jul 2013
    Location
    Kentucky
    Posts
    3
    thank you, I did find out that the bldg has been losing power and going into battery back up. My customer and the electrical company are in the process of setting a monitor to see if bldg or supply problem

  11. #11
    Join Date
    Mar 2004
    Location
    ottawa canada
    Posts
    2,022
    Quote Originally Posted by Nuclrchiller View Post
    You call that a rant? Sometimes I miss the old Graham...
    Like a fine wine things mellow with the years

  12. #12
    Join Date
    Aug 2009
    Location
    Prattville, Alabama
    Posts
    1,993
    Quote Originally Posted by Healey Nut View Post
    Like a fine wine things mellow with the years
    For some reason the phrase "dust on the bottle", from a country song, comes to mind...

  13. #13
    Join Date
    Jul 2013
    Location
    Kentucky
    Posts
    3
    I have updated my credentials. I did not intend to disrespect this forum. I agree that safety should be considered when passing along trade information. I stumbled onto this by accident; but thought what an awsome way to talk about and learn about the trade I have enjoyed for several years.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event