Looks good. Did you do all of it yourself?
Sent from my iPad using Tapatalk HD
Couple o/ York's. Let the flaming begin?
Looks good. Did you do all of it yourself?
Sent from my iPad using Tapatalk HD
Join http://scopeny.org/ Shooters Committee on Political Education
The world is full of sheep,try not to join the flock.
Support the Skilled Trades, Don't DIY
Had some help from my dad but mostly by myself yea. Noone can stand working with me I'm too picky they say.
Nice work! I like how you slipped the ak900s in there for all to see!
Looks good. Consider using conduit for 24v wire and running alongside your copper at outdoor units. Use wire tie to hold in place. I think you will like the way it looks if your picky.
Sent from my SCH-I535 using Tapatalk 2
Linesets are too sloppy. Just critiquing.
hope you plan to go back and clean them every few months with that dryer vent right there
Gustavo
I agree could be better. I did the indoors. Boss did outside. It was all I could do to get N2 flowing before he started burning em in.
Speed trumps perfection in his mind.
That dryer vent is against code I don't know where your located but that won't fly in Oklahoma
Not trying to be rude just so you know for future reference chapter six of the imc by icc
Duct board is not very professional Hey sheet-metal transition and a sheet-metal returned with look way more professional I have the same problem with people wanting to work with me due to the fact that I critique so much
Join http://scopeny.org/ Shooters Committee on Political Education
The world is full of sheep,try not to join the flock.
Support the Skilled Trades, Don't DIY
Is there a code that requires it or do they do that so it is faster when they have to redo it after the hurricanes every year
when someone going clean coil you making it hard.. after torch copper line back in
Join http://scopeny.org/ Shooters Committee on Political Education
The world is full of sheep,try not to join the flock.
Support the Skilled Trades, Don't DIY
Yea wondering what he meant too...
I actually had to go back to the job because the units are sweating profusely ....the nice wood platforms are already showing some mildew.
They set one unit to 69 at night and combined with the 77% RH in the garage @ 74 dew point I recommended a small portable dehum blowing the air over the units. I see no other way to stop it without conditioning the garage air some with the dehum.
I don't see what the complaint is. The evap went in fine it will come out fine. Could you please post some of your work so we can see your clearances. Also if it is installed correctly with a sealed return and regular filter changes it will never have to be removed for cleaning.
Sent from my iPad using Tapatalk HD
Join http://scopeny.org/ Shooters Committee on Political Education
The world is full of sheep,try not to join the flock.
Support the Skilled Trades, Don't DIY