existing coil calculations
I would like some help here to figure out how to go further
I have a factory which have old copper pipes installed in several rooms and every room has its own coil i know the diameter of existing pipes and the total length of the coil pipes in every room
now how can I calculate the existing coil capacity knowing the diameter and the length?
considering a cold water supplying every coil with temperature of 12 Deg C and the insider temp needed to maintain in each of these rooms is around 37 Deg C and humidity of 50%-60%
2012 ASHRAE Handbook- HVAC Systems and Equipment, Chapter 23 - Air-Cooling and Dehumidifying Coils
"If perfection is your goal, you may end up with good enough, what might you end up with when good enough is your goal?"
Wayne Pendergast, efficientcomfort.net
thanks I will check it
Originally Posted by penderway