Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2004

    AK900 how to calibrate clamp on readings

    Is there a way to calibrate the clamp on readings.
    When I have it clamp on the same pipe
    It has a 5 degrees difference.

  2. #2
    Join Date
    Nov 2011
    Charleston, Wv.
    the clamps don't appear to be as insulated as the velcro sensors.......I think it's because the rubber stays a bit higher temp. than the pipe.

    I checked the pipe clamps and the velcro sensors in an ice bath....they both read almost exactly the it boils down to insulation.

  3. #3
    Join Date
    Jun 2004
    I'll try to change the battery on the AK
    Then try it on the ice bath.
    I just had it clamp on liquid line

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365