Page 2 of 2 FirstFirst 12
Results 14 to 25 of 25

Thread: Cleaning

  1. #14
    Join Date
    Jun 2013
    Location
    orange county, ny
    Posts
    135
    try simple green..i'd like to now if it works... it should work great and ur eyes wont burn from the fumes

  2. #15
    Join Date
    May 2013
    Location
    near knoxville tenessee
    Posts
    178
    triple d mixed with really hot water. The grease drips right off.

  3. #16
    Join Date
    Apr 2010
    Location
    NYC
    Posts
    469
    Been there, I use what ever the restaurant uses to clean the greasy pans.
    Customer is alWays opposite of Left

  4. #17
    Join Date
    Jan 2007
    Location
    Stongsville Oh
    Posts
    905
    You are right about dilution, I meant to say but didn't that on some very greasy dried on stuff I have used it full strength and let it sit then flush a lot. This is a rare occasion. It is also kind off expensive to use wrong. I stand corrected.
    ckartson
    I didn't write the book I just read it!

  5. #18
    Join Date
    May 2007
    Location
    maryland, baltimore
    Posts
    135
    We had a really nasty kitchen, fryer was 6' from refrigeration units, everything was wet with grease. I used one of the spray can condenser cleaners and nearly shutdown the kitchen, the stuff removed the oil but left a hard film on the coils. They had Dawn soap in the kitchen, so I tried it and it got the coils clean and it left a residue that would not allow the grease to adhere to the very old steel coils. No offensive odor or food contamination.

  6. #19
    Join Date
    Dec 2012
    Location
    Lowell,MA
    Posts
    51
    i have used used evap foam cleaner in the aerosol can and pump sprayer to flush out after foam breaks, just keep the shop vac running so you don't get water everywhere

  7. #20
    Join Date
    Dec 2012
    Location
    Lowell,MA
    Posts
    51
    i have used used evap foam cleaner in the aerosol can and pump sprayer to flush out after foam breaks, just keep the shop vac running so you don't get water everywhere may need to do it a few times but it works

  8. #21
    Join Date
    Nov 2006
    Location
    Southeastern Pa
    Posts
    18,843
    Quote Originally Posted by VTP99 View Post

    Viper is good stuff.

    Checkout there YouTube video.
    You mean this one?

    http://www.youtube.com/watch?v=o9TVMcqZ69U
    [Avatar photo from a Florida training accident. Everyone walked away.]
    2 Tim 3:16-17

    RSES CMS, HVAC Electrical Specialist

    AOP Forum Rules:







  9. #22
    Join Date
    Jun 2013
    Location
    NORTHERN
    Posts
    991
    Quote Originally Posted by hvac69 View Post
    I have used oven cleaner and then washed with water in the past.
    and rinsed for 10- 15 min I hope , if it is that restaurant heavy duty that an owner took out his condensers on two stores without enough rinsing.

    I use refrigeration biodegradable 4:1 as on bottle and it really works well, no acid.
    Dawn is great for puncture wounds too and soaking cuts 30% to 70% water !- just like the doc used before 5 stitches went in to my palm

  10. #23
    Join Date
    Jan 2010
    Posts
    6,381
    Probably was supertech who first posted it.

  11. #24
    Join Date
    Jun 2013
    Location
    NORTHERN
    Posts
    991
    Those spray in can blasters work if you wear a painter's filtering face mask to never inhale...

    I have followed up with either a small compressed air, or CO2 blast (use appropriate safety nozzle)

  12. #25
    Join Date
    Jun 2013
    Location
    NORTHERN
    Posts
    991
    watz a supertech , VT?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event