Press the <+ and -> keys together to get to the current status screen then press ENTER to get KEYPAD CODE to display.
Originally Posted by solarchick
The default level 6 password is UP ARROW, RIGHT ARROW, ENTER. (separate keystrokes).
If the LCM is under a GCM then you can "synchronize clocks" under the SYSTEM menu to set the time and date provided the GCM is correct.
Why are you going to tear it apart to get to the battery?
Thanks for the info
The battery hasn't been changed since the unit was put in in 2000. I'm pretty sure it's dead. Could I be wrong?
Originally Posted by snmartin
Looking for programming manual for xpsi
Inherited site with about 60 MZ2 controllers on an ASD bus. The controllers themselves appear to be fairly robust. But found the control logic improper for the AHUs economizer dampers. Need to correct. Also inherited XPSI and an old laptop but no manual. I’m looking for F-23118.
Can anyone help?
Thanks in advance.
I mailed you what I have for manuals.
Your mailbox is full.
More about XPSI
I am working on a site and have to replace 2 MN-FLO3T's and I have XPSI but am unfamiliar on how to use it. I need to retrieve the existing configuration from the old ones then download that config to the new units. Any manuals or help is appreciated.
I have mailed you what I have. Good luck, I hope they are what you need.
Thanks that manual will be extremely useful for this site. I still do have a need for other manuals on XPSI
Would still love manuals
I have talked to someone and it turns out I was using wrong software. I was trying to use XPSI and I needed to hook up to the network t-stats and use MNETCI. I would still love more manuals as I like to read to learn. Thanks in advance.
08-17-2010, 10:08 AM
OK, me too I guess. Just inherited a site with many Microzone II controllers. Has XPSI w/ Niagara. I supervise maintenance customers with almost every controls system you can name, but this one is new to me. I have access to a retired tech (even older than I am!). I need a programmer's manual for this block code. I have figured out some of it but "flip-flop"? come on! Anyone who can direct me to a book or e-mail me some help? This old guy would sure appreciate the help.
08-17-2010, 02:48 PM
Get hold of Allen at http://www.abcontrolsusa.com/ he can set you up with the manuals.
10-15-2010, 08:51 AM
Do you have the MZII manual in pdf? I would like a copy.
Originally Posted by boardsmoker
10-16-2010, 01:09 AM
do u neeed microzone literature give me ur e-mail address
Originally Posted by kevinbrock
10-19-2010, 01:56 AM
Microzone II "Current status" display problem
I am facing a problem of displaying “Current status” from Microzone II controller.
The current status display appears with gargled characters and the numbers are not readable.
Is any of you have faced this and have a solution ??
I am using a laptop with windows 98 OS and using ZPSIPC.EXE program to access the controller. Tried with a machine with XP OS but gives the same result.
The Microzone II controller is not in a network. It is stand-alone.
All programming and edit functions working perfectly expect the gargled display
Display problem appears only in 3 screens.
1. Current status display
2. All point History
3. Trend screen.
Any help ??