Page 16 of 22 FirstFirst ... 6910111213141516171819202122 LastLast
Results 196 to 208 of 282
  1. #196
    Join Date
    Jan 2013
    Location
    flint
    Posts
    4
    Hello and greetings to all,

    I have taken over a school system and have no documentation on the 8000 network and microzones and would appreciate any manuals you could give as i have 23 buildings using this system

    I deeply thanks for any info you can give to help me with this system.
    Scott

  2. #197
    Join Date
    Jan 2013
    Location
    flint
    Posts
    4
    also using pem's thanks for any help u can give or manuals

  3. #198
    Join Date
    Mar 2006
    Location
    Omaha NE
    Posts
    62
    1

  4. #199
    Join Date
    Mar 2006
    Location
    Omaha NE
    Posts
    62
    I can email you a link to download all that you will need for manuals. Since you don't have an email in your profile please send me an email from my profile address. If you need any help give us a call. we work on these system all over the place. I have about 8 guys that know this stuff really well. We also can integrate this old stuff into Niagara AX technology to get you into the 21st century. We can demo so of our integrations if you would be interested. Let me know if you need anything else.

  5. #200
    Join Date
    Dec 2007
    Location
    Midwest
    Posts
    44
    Controltec, if it's not too much trouble I would like to get a copy of the manuals as well.
    Thanks

  6. #201
    Join Date
    Apr 2009
    Location
    Myrtle Beach, SC and Costa Rica
    Posts
    3
    Hi,
    I need a copy of XPSI.

  7. #202
    Join Date
    Jan 2013
    Location
    flint
    Posts
    4
    thanks for any help you can give, and mabey a copy of xpsi, I have updated my profile and email address,

    Thanks in advance for any help

    scott

  8. #203
    Join Date
    Oct 2009
    Posts
    630
    Controltec could you also send me those manuals? TIA

  9. #204
    Join Date
    Mar 2006
    Location
    Omaha NE
    Posts
    62
    Igotworms

    You've got mail. Feel free to call me if you need anything.

  10. #205
    Join Date
    Nov 2005
    Location
    Shreveport, Louisiana
    Posts
    2,329
    WHat bare the hyperterminal settings???????????
    UA Local 141

  11. #206
    Join Date
    May 2002
    Location
    Baton Rouge, Louisiana
    Posts
    3,899
    OOOOOOOOHHHHHHHHHHHHHHHHH manuals hook a brother up please
    Quote Originally Posted by MatrixTransform View Post
    very soon it is you that will be pwned

  12. #207
    Join Date
    Mar 2006
    Location
    Omaha NE
    Posts
    62
    hyperterminal settings will vary depending on what was setup in the GCM. Usually 8 none and 1 with a 9600 baud works just fine. You will need a 9 to 25 pin serial cable. Depending on the type of cable you have you will have to use the dte to dce switch inside the cabinet on the port you are connected to. I usually pick a baud rate and then try the switch in one direction, if it doesn't work flip it and try again. you will also have to hit the enter key to wake the GCM up and create a connection.

  13. #208
    Join Date
    Apr 2008
    Posts
    7
    Can someone please send me the manuals on Microzone II's?

Page 16 of 22 FirstFirst ... 6910111213141516171819202122 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event