Results 1 to 3 of 3

Thread: Scotsman SCE170

  1. #1

    Scotsman SCE170

    Looking for the test procedure for the bin switch on an SCE170A1C. The curtain magnet is good and lined up with the switch. Looking for info on testing the switch and the controller.

    Mike

  2. #2
    Join Date
    Feb 2006
    Location
    Phoenix,AZ
    Posts
    2,850
    use a ohmmeter or look at the lights.

  3. #3
    Thanks for the input.
    I should have been more detailed in t he 1st post. Both lights are out. The switch is 4 wire, low voltage DC. Not sure which 2 wires will keep the machine from starting. Also, there is a visible hot spot on the control. I've been searching the Scotsman website but no detail on this circuit. I would think there is a procedure for testing both parts.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event