Results 1 to 4 of 4

Thread: Rheem

  1. #1
    Join Date
    Sep 2004
    Location
    Jersey
    Posts
    389

    Rheem

    Hello all,

    I just changed a heat exchanger on a Rheem RTU Model RRGG-10E43JKR.
    I have a question about the panels where it exhausts,
    you have the plate to separate the fan and exhaust with an angled deflector at the heat exchanger ports on the bottom.
    then there is a panel that sit on the top of the ports that covers approx. half of the port.
    Does this sound correct. I did install it the way I took it apart. The unit is a little old and way to many hands in it
    if someone has a pic of the exhaust section please upload or a parts diagram.

    Thank you
    Ride hard on a Harley!!

  2. #2
    Join Date
    Sep 2004
    Location
    Jersey
    Posts
    389
    I need to see a completed pic of this.
    http://i277.photobucket.com/albums/k...RheemRRGG1.jpg
    Ride hard on a Harley!!

  3. #3
    Join Date
    Jul 2007
    Location
    Virginia
    Posts
    5,519
    I sent you an email with the Parts list and a couple other manuals. The manuals are old, so the pictures are not real clear.

    Not sure it will give you what you need, but take a look and see.
    Instead of learning the tricks of the trade, learn the trade.

  4. #4
    Join Date
    Sep 2004
    Location
    Jersey
    Posts
    389
    Rundawg, thank you for the manuals. I will see if it show what I am looking for.
    Ride hard on a Harley!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event