Results 1 to 2 of 2

Hybrid View

  1. #1

    Ancient exhaust fan rehab - couple questions please

    Hi folks,

    Fist off thanks for the forum! Been reading and it's an excellent resource.

    I lease an old commercial warehouse in NC that was built in the 20's. The exhaust fan has never worked and I've sweated through enough summers without it. Landlord won't fix it so it's up to me. I got on the roof and pulled the front of the shroud. Fan spins fine and there were a couple holes for oil on top of the arbor housing. Threw some synthetic gear oil I had left over from servicing my motorcycle in there. Motor is shot and there's no belt. So my plan is to replace the motor and belt and she should be in business right?

    My main question is about the motor. I'm attaching a picture of it. I was hoping to get some info in terms of HP and RPM but this thing is so coated with gunk I can't find a thing. Does anyone know what kind of specs I need on this? Fan looks to be 48" in diameter...belt measured 5 feet long. Also do I need some other kind of oil for that arbor?

    Any advice greatly appreciated!

    Name:  CIMG1283.jpg
Views: 69
Size:  37.2 KB

    Name:  CIMG1284.jpg
Views: 62
Size:  31.3 KB

  2. #2
    Join Date
    Aug 2002
    Location
    Southold.calm
    Posts
    6,325
    They say a pic is worth a thousand words but not in this case.
    Take the motor to a motor shop and have them match it up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event