Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2012
    Location
    Northeast
    Posts
    210

    Fluke 922 Airflow meter problem

    I just bought this meter about 5 months ago and went to use it for cfm readings for the first time a couple weeks ago and noticed a problem.

    If I put it in the CFM mode and let the meter sit for a while it starts reading cfm. the reading starts low and then creeps up. I can't find my notes for the test I did. But if anyone else has this meter can you try this test. You need to let it sit for about 10 minutes before it starts to climb. At least mine.

    I called Fluke and talked to them about this and they said they would get back to me and never have.

    Thanks

  2. #2
    Was the air temperature remaining constant?

  3. #3
    Join Date
    Jun 2012
    Location
    Northeast
    Posts
    210
    Yes. Steady as a rock

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event