Results 1 to 3 of 3

Thread: Just signed up

  1. #1
    Join Date
    Apr 2013
    Posts
    3

    Just signed up

    Hey everyone. My name is Phil. I have been in the Residential HVAC for 25 years. I have been doing mostly Residential Load Calculations, system design, and drawings.

  2. #2
    Join Date
    Feb 2013
    Location
    Phoenix, AZ
    Posts
    198
    Welcome Phil!

    Sent from my ADR6300 using Tapatalk 2

  3. #3
    Join Date
    Apr 2013
    Posts
    3
    Thanks. I haven't quite figured out my way around yet so please bear with me. I'm sure that the adequate leaving supply air temp. and moisture content from the cooling coil as it applies to the SHR and Cfm on the psychrometric chart have been discussed at length in various levels on these forums. Without starting a new thread can you point me in the right direction. Unless you would be able to talk about it with me. Thanks for the reply.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image